1212
8. ADVANCED USAGE
8.1 Light Effect
2S
x1
• Press to turn light effect on or off.
• Hold for more than 2 seconds to turn strobe light on or off.
• Rotate the knob clockwise / counterclockwise to switch
between different light patterns: Rock, Flow, Cross, Ripple,
or Flash.
8.2 Sound Effect
Press | | to select a special sound effect such as horn,
clapping, scratch.
8.3 TWS Mode
You can connect two PartyBox speakers to each other via TWS
mode.
Press TWS on both speakers.
To exit TWS mode:
Power off or press TWS on either speaker.
Tip:
– By default, the speaker connected to your Bluetooth device acts as
the primary speaker (left channel), while the other one acts as the
secondary speaker (right channel).
8.4 JBL PartyBox App
Download and install the JBL PartyBox App to get more from
the product.
To Next Page
Loading...
