Harman JBL PARTYBOX 710 - Using Your PartyBox; Bluetooth Connection

88
5. POWER ON
Cautions:
– Use the provided power cords only.
1
2
OFF
ON
1. Connect AC power.
2. Press to power on.
Tip:
– The speaker switches to standby mode automatically after 20
minutes of inactivity. You can press on the speaker to switch to
normal operation.
6. USING YOUR PARTYBOX
Notes:
– Only one sound source can be played at a time. The priority order
is USB -> BLUETOOTH -> AUX.
– Starting a source with higher priority will always interrupt a source
with lower priority.
– To start a source with lower priority, stop the source with higher
priority rst.
6.1 Bluetooth Connection
You can use the speaker with your Bluetooth enabled smartphone
or tablet.
DEVICES
JBL PartyBox 710
Bluetooth
Bluetooth
2
1
<10 m (33 ft)
1. Press on the speaker to enter Bluetooth pairing mode.
2. Choose “JBL PartyBox 710” on your Bluetooth device to
connect.
3. Once successfully connected, you can stream audio from
your Bluetooth device to this speaker.
Notes:
– This speaker can memorize a maximum of 8 paired devices. The
ninth paired device will replace the rst one.
– Enter “0000” if a PIN code is requested for connection to a
Bluetooth device.
– Bluetooth performance can be affected by the distance between
this product and your Bluetooth device and the environment of
operation.
To terminate the Bluetooth-enabled device:
• Turn off this speaker, or
• Disable Bluetooth on your device.