Need help?Do you have a question about the Harman Soundcraft Ui16 and is the answer not in the manual?
General| Channels | 16 |
|---|---|
| Outputs | 6 |
| USB Recording | Yes |
| USB Audio Interface | Yes |
| Wi-Fi | Yes |
| Ethernet Connectivity | Yes |
| Sampling Rate | Up to 48kHz |
| Bit Depth | 24-bit |
| DSP Processing | Yes |
| Remote Control | Yes |
| EQ | 4-band parametric EQ |
| Control | Android |
| USB | 1 x USB 2.0 |
Covers EMC, LVD, FCC compliance, and warnings about device modifications and potential interference.
Highlights the cross-platform compatibility, HARMAN signal processing, and core functionalities of the Ui mixers.
Explains safety symbols, earthing requirements, and mains lead wire colour coding for safe operation.
Details warnings on installation, ventilation, heat sources, water usage, and proper plug usage.
Provides advice on protecting hearing from high volume levels and safe monitoring practices.
Outlines the warranty coverage, conditions for claims, and exclusions for defects and damages.
Offers guidance on manual structure and tips for new users to get acquainted with the device.
Details the physical inputs, outputs, power connector, USB ports, and indicators on the Ui unit.
Diagram and explanation of the audio signal path from input to output, including processing stages.
Step-by-step guide for connecting computers, tablets, and phones via Wi-Fi and setting a password.
Instructions for downloading and installing firmware updates for the Ui mixer via USB.
Explains basic navigation techniques like scrolling, tapping, and double-tapping for software control.
Provides a comprehensive list of specific control actions for various software pages.
Describes Level 1, 2, and 3 navigation, plus main screen sections like MIX, METERS, GAIN, EDIT.
Explains the function of specific tablet screens like METERS, MIX, GAIN, EDIT, AUX SENDS, FX SENDS.
Explains how to access menus, specific screens, and navigation elements on the phone interface.
Details the characteristics of Input Channels, Aux, Sub Group, FX Returns, and Master Channels.
Covers controlling input gain, phantom power, phase, and understanding input metering on the Gain page.
Explains fader control, VU metering, mute, solo, pan/balance, and channel name functionality.
Details how to access channel presets, rename channels, copy/paste settings, and stereo link.
Describes creating aux mixes, adjusting send levels, and using Aux Master controls for monitoring.
Covers master channel display indicators, balance control, and programmable F1/F2 buttons.
Details DigiTech amp modelling, cabinet selection, and Hi-Z input activation for guitars.
Explains how to use the 4-band parametric EQ, HPF, RTA, and De-Esser features for channel processing.
Describes the 31-band Graphic EQ, Real Time Analyzer, and bypass functionality for master outputs.
Covers AFS2 modes (Fixed/Live), sensitivity, bypass, and the procedure for ringing out a system.
Details the operation of the compressor and gate, including threshold, ratio, attack, release, and knee settings.
Explains how to assign channels to Mute Groups and View Groups for quick recall and organization.
Describes how to access and edit the parameters of the internal Lexicon FX processors (Reverb, Delay, Chorus).
Details the specific parameters for Reverb (Time, HF, Bass), Delay (Tempo, Length), and Chorus (Detune, Density).
Explains how to create, save, load, and manage Shows and Snapshots for mixer configurations.
Covers using the built-in media player for tracks, recording the main mix, and file type compatibility.
Details settings for headphone routing, Wi-Fi network setup, password, language, and user access.
To Next Page
