Need help?Do you have a question about the Harman Soundcraft Si impact and is the answer not in the manual?
General| Type | Digital Mixer |
|---|---|
| Computer Connectivity | USB |
| A/D Resolution | 24-bit/48kHz |
| USB Recording | Yes |
| Outputs - Digital | AES/EBU |
| EQ Bands | 4-band |
| Effects | Lexicon Effects |
| Dynamic Processing | Compressor, Gate |
| Display | Touchscreen |
| Inputs - Mic Preamps | 32 |
Overview of the console's capabilities and features.
General warnings, precautions, and symbol explanations.
Lists essential safety warnings for operation.
Guidance on safe use and hearing protection.
Guides users on how to navigate the manual.
Details how controls can be assigned to functions.
Describes core console architecture elements.
Overview of the touch screen, menus, and navigation.
Instructions for turning the console on and off.
Identifies and describes key physical sections of the console.
Explains the color-coded fader illumination feature.
Details the fader strips and their assignment capabilities.
How to switch between different fader configurations.
The central control surface for channel parameters.
System for quick mix bus contribution assignment to faders.
Explains the four main fader layers and their initial assignments.
Details the function of SEL, ON, SOLO buttons.
Describes how to assign mono inputs, stereo inputs, mixes, MTX, and VCAs.
Explains INSERT BLANK and SHIFT operations for slots.
How the ACS controls parameters and triggers focus display.
How tOTEM buttons assign bus contributions to faders.
Overview of the touch screen, MENU, ENCODER, APPLY.
Accesses show file operations and global isolate settings.
Provides system information and settings like date, time, wordclock.
Adjusts brightness settings and D.O.G.S. system.
Used to assign DSP channels to control channel slots.
For setting up and patching insert sends and returns.
Configures solo system settings like trim and priority.
Settings and operations for the built-in oscillator.
Settings for monitoring systems like delay and mono check.
Channel specific settings for inputs and VCA masters.
Output channel specific settings like naming and patching.
Graphic representation of EQ for selected channels.
Describes the assignable patching for inputs and outputs.
How to select inputs and outputs using the patching screen.
Automates patching for multiple channels or buses.
Configuring IP settings and accessing Soundweb controls.
Lists the console's default input/output assignments.
Describes the two option card slots for digital I/O.
Details various digital audio interface cards.
Describes BLU Link, Aviom, CobraNet, and MADI-USB cards.
Describes Mini and Compact Stagebox options.
Explains the card's audio connection capabilities.
Specifies the type of USB cable needed for connection.
Details the DIP switches for card setup and functionality.
Explains driver installation and buffer size settings.
Introduces input channels, mix, matrix, and main busses.
Describes input sources and how they feed into busses.
Configuring basic channel properties.
Setting global/individual pre/post routing for mix busses.
Describes mix bus uses, EQ, and limitations.
Configuring mix bus properties.
Setting pre/post routing and physical output assignments.
Describes uses for matrix busses and their limitations.
Configuring matrix bus properties and output assignments.
Explains how main LR and Mono busses are routed and controlled.
Configuring main output properties and assignments.
Describes FX send busses feeding Lexicon FX units.
Introduces common DSP elements across channels.
Explains how Function Focus displays parameter details on screen.
Describes the logical sections of the ACS.
Details phantom power, gain/trim, HPF, and signal metering.
Explains gate controls and sidechain filtering.
Explains ATTACK, RELEASE, GAIN, THRESHOLD, RATIO.
Details HF, HI MID, LO MID, LF band level, frequency, and Q.
Explains DELAY, PAN, and LR/M routing options.
Describes display elements and ON, SEL, SOLO buttons.
How to assign and adjust GEQ bands via faders.
Setting up and using channel muting groups.
Controlling channel faders via VCA masters.
Copying and pasting channel or bus settings.
Checking and changing switch statuses across channels.
Configuring and using the channel solo functions.
Settings for the engineer's monitoring system.
Clearing and resetting parameters and settings.
How to create and select mute groups.
How to create and assign channels to VCA groups.
How to copy and paste channel, bus, and FX settings.
How to check and change switch states across channels.
Explains PFL, AFL, Solo In Place, and related controls.
Details solo settings like Highlight, Blend, and status indicators.
Describes the monitoring source and level controls.
Configures monitor output patching, mono check, and delay.
Resets individual channel parameters to default.
Resets multiple channels or parameters across the console.
Introduces the Show, Cuelist, and Snapshot system.
Creating, saving, loading, and isolating show parameters.
System for preset console states and automation.
Details on updating, editing, moving, and deleting cues.
Modifying cue details and HiQnet parameters.
Overview of FX units and their send/return connections.
Describes Hall, Plate, Chamber, Room, Ambience, Spring, Reverse reverbs.
Adjusting Pre Delay, Reverb Time, Early Reflections, Size.
Shaping reverb characteristics like Shape, Spread, Diffusion, and High Cut.
Introduces various delay algorithms and their uses.
Adjusting delay length, repeats, and using filters.
Using ducking, smear, tap ratio, depth, pan, and mix.
Describes Chorus, Flanger, Phaser, Tremolo, Vibrato, Pitch Shift, Detune.
Details Speed, Depth, Voices, Regeneration, Pre Delay.
Covers Waveform, Phase, Spread, Drive, Shift 'n'.
Console brightness and D.O.G.S. system settings.
Console information, network settings, and reset functions.
Access privileges, user profiles, and console locking.
Step-by-step guide for updating console firmware via USB.
Restores factory defaults and formats the internal SD card.
Controls for LED, FaderGlow, Screen, and LCD brightness/contrast.
Enabling/disabling Direct Out Gain Stabiliser and Bus Master select.
Resetting channels, buses, patching, all parameters, and viewing the event log.
Software version, date, console name, and type.
IP address, subnet mask, wordclock, and HiQnet configuration.
Adding, editing, and deleting users and profiles.
Securing the console with user selection and password.
Setting User Name, Profile, and Password for user accounts.
Defining permissions for console functions per user profile.
Step-by-step guide for updating console firmware.
Restores defaults and formats the internal SD card.
Sine wave/pink noise generation and routing options.
Setting frequency, type, and physical output patching.
Guide for identifying and resolving no sound problems.
Verifying signal path, fader levels, and panning.
Diagnosing issues related to gate function and insert returns.
To Next Page
