Harman Soundcraft Si impact - 3.1 FADER LAYERS; Fader Layer Configurations and Defaults

User Manual
3.1: FADER LAYERS
ASSIGNABLE CONTROLS > FADER LAYERS
3.1: ASSIGNABLE CONTROLS > FADER LAYERS
The are four main Fader Layers on the Impact console, selected by the FADERS button group (A,
B, C, and D) to the right of the Control Channels. The additional buttons in this group assign Graphic
EQ bands across the faders for convenient control.
Each layer is made up of 24 Control Channels, plus the Left/Right and Mono/Centre main mix Control Channels.
By default, Layers A and B are assigned to input channels, with the Stereo input channels on the right hand end of layer
B;LayerCisassignedtoMixMasterchannels;andtherstfourControlChannelsofLayerDareassignedtotheMatrix
Master channels.
TheseassignmentsareusercongurableintheFADERSETUPTouchScreenmenu(seetheControlChannel
Assignment section 3.2.1).