Harman Soundcraft Si impact - 6.3.1 MATRIX OUTPUTS SETUP; Matrix Bus Naming, Width, and Patching

User Manual
6.3.1: MATRIX OUTPUTS SETUP
CHANNELS & BUSSES > MATRIX OUTS > SETUP
6.3.1: CHANNELS & BUSSES > MATRIX OUTPUTS > SETUP
Name
Name the selected Matrix Bus.
When the Name field is selected, a QWERTY keyboard will appear on the Touch Screen so you can enter the desired
name.
Isolate
Isolate the Matrix Master DSP Channel from automation playback.
When a new cue is loaded, this channel will not be aected and its setting will not be changed. However, current
channel settings are still stored when a cue is stored.
Matrix Width
Choose Mono or Stereo type for the Matrix Master Output.
Patching
ChoosespecicanalogueordigitaloutputsfortheMasterOutputChannel.
Touching the value fields will bring up the standard Patching setup on the Touch Screen. Two outputs can be
allocated, with individually patchable left and right connections. For more detail, please see section 5 - Inputs &
Outputs.
TherearevariousMatrixoutput-specicoptions,foundviatheTouchScreenMainMenuOUTPUTSbutton.
These offer naming, isolate, width, and physical output patching.