Harman Soundcraft Si impact - 6.4 MAIN MIX OUT; Main Mix Bus Routing and Control

User Manual
6.4: MAIN MIX OUT
CHANNELS & BUSSES > MAIN MIX OUTPUTS
6.4: CHANNELS & BUSSES > MAIN MIX OUTPUTS
The Main Left, Right, and Mono/Centre Busses and Master Channels are used for the main mix
output and receive their inputs from the Input Channels and Mix Bus Master channels. The Mono
bus is the Centre bus when the Panning Mode of contributing channels is set to LCR, and Mono
routing is enabled.
The Left and Right busses feed the main Left/Right stereo output channel, which is permanently assigned to the Left/
Right Control Channel. The Mono bus feeds the main Mono/Centre output channel that, during normal operation, is
controlled by the MONO/SEL control channel (though that channel is assigned to Bus Masters when a tOTEM
selection is active.
The Left/Right and Mono/Centre channels include a Graphic Equaliser, though do not use the ACS mic/line input
controls (48V, Gain/Trim, Phase), and they do not have a Gate processing element.
TherearevariousMainLeft/RightandMono/Centre-specicoptions,foundviatheTouchScreenMainMenu
OUTPUTS button. These offer naming, isolate, and physical output patching.