Harman Soundcraft Si impact - 10.3.1 MISC FX PARAMETERS; Modulation and Pitch FX Parameter Controls

User Manual
10.3.1: MISC FX PARAMETERS
LEXICON FX > DELAYS > DELAY PARAMETERS
10.3.1: LEXICON FX > DELAYS > MISC FX PARAMETERS
Speed
Sets the speed at which the modulated effect cycles.
Depth - LFO Depth
Scales the intensity of the effect.
This control aects the output of the LFO only. It has no eect on the outputs of the individual waveforms.
Voices - Number Of Voices
Controls the number of additional Chorus voices.
Higher amounts add more richness to the Chorus eect.
Regeneration
Controls the amount of modulated signal being fed back into the input, creating feedback.
Higher amounts add more resonance to the signal.
Diff - Diffusion
Creates a time-smoothing effect similar to diffusion in reverb.
Diusion can be a subtle eect to add a little warmth to the chorus.
Pre Dly - Pre Delay
Determinestheamountofoffsetbetweenthetwosignalsthatcreatetheangeeffect.
Lower values create a tighter eect, higher values result in a more extreme “whooshing” sound.