Harman SoundCraft Vi3000 User Manual

4.3: INPUT CHANNEL > DYNAMICS
Vi3000 USER MANUAL
®
4.3 INPUT CHANNEL > De Esser
Vi3000 USER MANUAL
®
15.3 15.3 TALKBACK & OSC > TB SETUP
15.3 TALKBACK & OSC > TB SETUP
15.3: Talkback Setup & Use
Talkback
Source Active Inactive
Select the Talkback
source / input.
If (NONE) is selected the console’s TB mic XLR is auto-
matically selected. The button opens up an assignment
selection page in the master touch screen area where
you can select any available microphone input.
Close source
selection
screen
Open source
selection
screen
Talkback Exter-
nal Output Active Inactive
Assign the Talkback
output directly to indi-
vidual physical console
outputs.
Opens an output assignment page with all available
physical outputs.
Close patch-
ing screen
Open patch-
ing screen
Talkback Pre-
set Assignment Active Inactive
Assign a selection of
output busses to the
selected Talback preset
Close assign-
ment screen
Open assign-
ment screen
Talkback is a communications path between the console operators and the artists, crew, and other personnel.
There is a direct-plug mic input (XLR) on the console surface with the TALKBACK/OSC group of controls. This and
other talkback routing and conguration options are detailed below.

Harman SoundCraft Vi3000 Specifications

General

Brand	Harman
Model	SoundCraft Vi3000
Category	Music Mixer
Language	English