Harman SoundCraft Vi3000

To Next Page

To Previous Page

Vi3000 USER MANUAL

16.3 16.3: MENU > GPIO

16.3: MENU > GPIO

Edge Select

Choose the triggered

edge for this GPO pin.

Choose either Rising, Falling, or Both. If you choose

'Both' the {Polarity} eld will become available.

Polarity Select

Set the Polarity of the

output.

The encoder changes the polarity between positive and

negative. This eld is only available if the {EDGE} eld is

set to BOTH.

Harman SoundCraft Vi3000 - Page 156