Harman SoundCraft Vi3000 - Page 170

Vi3000 USER MANUAL
®
16.10 16.10: MENU > SYSTEM
16.10: MENU > SYSTEM
Desk
Information
Display the current
status of the desk’s 4
bays.
The numerical data displayed for each bay gives the
revision number of the rmware currently installed in
each bay. This information may be needed by Sound-
craft service personnel if technical or service support is
requested.
StageBox
Information
Display a graphical
representation, and the
current status, of the
cards in the Stage Box.
This also shows the status of the PSU(s) and the status
of the voltages for the analogue (VA) and digital (VD)
power supply rails. The cooling fan status is also report-
ed. A blue label under a card display indicates an input
function, and a red label indicates an output function.
If the card conguration of the Stagebox is changed
(for example when AES input or output cards are tted
in place of the analogue cards), the card labels will be
automatically updated with the new card types if the
‘Recong’ button on the Stagebox front panel has been
pressed after changing the cards.
VM² / HiQnet
Set-up
Enter the VM² setup
screen
VM² stands for ‘Vistonics Microphone Monitoring’. It
takes advantage of Harman’s HiQnet control network to
allow a level of integration between a HiQnet-enabled
AKG Wireless Microphone system, and a Soundcraft Vi
Series console.
This section is also used to set up a network IP address
for use with both ViSi IPad remote control app, and the
Soundcraft Realtime Rack host control for Universal
Audio Plug-ins.
Please see the HiQnet/VM² reference chapter 18 for
more detail.