4.3: INPUT CHANNEL > DYNAMICS
Vi3000 USER MANUAL
4.3 INPUT CHANNEL > De Esser
Vi3000 USER MANUAL
18.2.2 18.2.2: VM ² > STATUS > VST
18.2.2: VM ² > STATUS > VST
To see more detailed information about the AKG Microphones, the Input section of the channel strip can be zoomed
by touching the Input touch eld at the top of the strip. Three special Vistonics elds are added to the zoom view of
channels that are patched to AKG-associated connectors, giving more detailed information of RF level(bargraph and
numerical signal strength in dB), Battery level (bargraph icon plus numerical readout of remaining battery life in hours),
and the internal gain of the microphone.
Note that this information is display-only, there is no control possible over the AKG microphones, other than with the
Locate (LOC) button. Note also that the input gain control of the Vi microphone input preamp will be automatically set
to 0dB gain and is not available for control on channels that have AKG microphones assigned.
VM² VST Section Information
To Next Page
Loading...
