Vi3000 USER MANUAL
6.3 6.3: INPUT CHANNEL > ENCODER MODE
Vi3000 USER MANUAL
6.3: INPUT CHANNEL > ENCODER MODE
Input Encoder Mode
Mode: Input
Gain Field / Group: Active
(Default) Switch the in-
put Encoders to control
analogue input gain.
Select Mode
Mode: Gate
Threshold Field / Group: Active
Switch the input En-
coders to control Gate
Threshold.
Select Mode
Mode: Pan Field / Group: Active
Switch the input Encod-
ers to control Pan.
Select Mode
These buttons determine the function of the input channel encoder at the top of the main channel strip.
If [ALL BUSSES] is active or a Matrix output is soloed, the channel encoders are disabled and have no function (the
previous function is remembered however).
To Next Page
Loading...
