Harman SoundCraft Vi3000 - Page 82

Vi3000 USER MANUAL
®
7.3.3 7.3.3: OUTPUTS > MASTERS > PROCESS
7.3.3: OUTPUTS > MASTERS > PROCESS
Bus Channel
Strip EQ
Adjust the parameteric
EQ for this Master.
The output bus parametrc EQ is the same is used for the
input channel EQ. Please see the input channel refer-
ence for more detail.
Bus Channel
Strip GEQ
Maps the BSS Graphic
equaliser for this block
to the console faders.
See the BSS Graphics Equaliser reference later in this
chapter for more Detail.
Bus Channel
Strip Dynamics
The controls are identi-
cal to those of the input
channels, except there
are no Gate or De-Ess-
er modes available for
output busses.
Bus Channel
Strip Insert,
Delay
The controls for the
insert section are similar
to those of the input
channels.
Patch and name the buss, as well as control panning
insert conguration, delay, and more. Extra functions
unique to the insert section of the output channels are
Low Cut Filter, Phase, and Delay. However, thse are the
same as those in the Input section of the input channels.