Vi3000 USER MANUAL
10.1 10.1: MONITORING > CONTROL
10.1: MONITORING > CONTROL
Solo Blend Range Low Range High
monitor_con_solo-
Blend.jpg
Adjust the background
level of the monitoring
source signal.
The level of the non-solo source adjusted from OFF to
-10dB to allow solos to be heard in the context of a mix
that has a reduced level.
OFF -10dB
Solo Input Pri-
ority Active
monitor_con_soloIn-
Priority.jpg
Activate Input Priority
Mode
Allows an Output Solo to remain active, whilst an Input
Solo is temporarily activated ‘over the top’ of it. When
the Input Solo is deactivated, the Output Solo’s audio
will return to the Solo Bus. For more detail, see the Solo
System reference chapter 11.
Input Priority
Active
To Next Page
Loading...
