IX
G Declarations of Conformity
G1 Class A Equipment - FCC Notice
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide a reasonable protection against harmful interfer-
ence when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio com munications. Operation of this equipment
in a residential area is likely to cause harmful interference, in which case the
user will be required to correct the interference at his own expense.
This Class A digital apparatus meets the requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numérique de la Classe A respecte toutes les exigences du Règle-
ment sur le matériel brouilleur du Canada.
Caution: Any changes or modifications not expressly approved by the manufacturer
could void the user’s authority to operate the equipment. Also refer to relevant
information in this manual.
G2 CE Declaration of Conformity
We,
StuderProfessionalAudioGmbH,
CH-8105Regensdorf,
declare under our sole responsibility that the product
StuderD21m,DigitalI/OSystem
(fromserialno.0001)
towhichthisdeclarationrelates,accordingtofollowingregulationsofEU
directives and amendments
• LowVoltage(LVD):
73/23/EEC + 93/68/EEC
• ElectromagneticCompatibility(EMC):
89/336/EEC + 92/31/EEC + 93/68/EEC
is in conformity with the following standards or normative documents:
• Safety:
EN 60950-1:2000 (Class I equipment)
• Safetyoflaserproducts:
EN 60825-1:2004 + A11 + A2, EN60825-2:2000
• EMC:
EN 55103-1/-2:1996, electromagnetic environments E2 and E4.
Regensdorf, November 12, 2004
B.Hochstrasser,PresidentM.Lienert,ManagerR&D
Conformity
To Next Page
Loading...
Need help?
General
