Harman Studer D21m - Page 61

Date printed: 24.01.12
45
D21m System
16-Ch Mode (Default Setting)
8-Ch Mode
Connector Pin Assignment, 48 kHz Operation (2 × 25pin D-type, female, UNC 4-40 thread)
1
Solder/Crimp View
(or Socket View)
13
25
14
Pin Signal CH 1-8 Signal CH 9-16 Pin Signal CH 1-8 Signal CH 9-16
1 CH 1/2 out CH 9/10 out 14 GND GND
2 CH 3/4 out CH 11/12 out 15 GND GND
3 CH 5/6 out CH 13/14 out 16 GND GND
4 CH 7/8 out CH 15/16 out 17 GND GND
5 LRCK out LRCK out 18 EMPH out EMPH out
6 FS 0 out FS 0 out 19 FS1 out FS1 out
7 GND GND 20 FS0 in FS0 in
8 FS 1 in FS 1 in 21 EMPH in EMPH in
9 LRCK in LRCK in 22 GND GND
10 CH 7/8 in CH 15/16 in 23 GND GND
11 CH 5/6 in CH 13/14 in 24 GND GND
12 CH 3/4 in CH 11/12 in 25 GND GND
13 CH 1/2 in CH 9/10 in
Connector Pin Assignment, 96 kHz Operation (2 × 25pin D-type, female, UNC 4-40 thread)
1
Solder/Crimp View
(or Socket View)
13
25
14
Pin Signal CH 1-8 Signal CH 9-16 Pin Signal CH 1-8 Signal CH 9-16
1 CH 1 out CH 5 out 14 GND GND
2 CH 2 out CH 6 out 15 GND GND
3 CH 3 out CH 7 out 16 GND GND
4 CH 4 out CH 8 out 17 GND GND
5 LRCK out LRCK out 18 EMPH out EMPH out
6 FS 0 out FS 0 out 19 FS1 out FS1 out
7 GND GND 20 FS0 in FS0 in
8 FS 1 in FS 1 in 21 EMPH in EMPH in
9 LRCK in LRCK in 22 GND GND
10 CH 4 in CH 8 in 23 GND GND
11 CH 3 in CH 7 in 24 GND GND
12 CH 2 in CH 6 in 25 GND GND
13 CH 1 in CH 5 in