To Next PageTo Next PageWhy does my Harmar Mobility Lifting System lift operate slowly or not at all?
If your Harmar Mobility Lifting System lift is operating slowly or intermittently, a potential cause could be a bad electrical connection or a tripped circuit breaker. Check and clean all connections that might be loose or dirty, because the lift motor requires quality electrical connections to operate at full capacity.
What to do if my Harmar Mobility AL560 Lifting Systems makes a ratcheting sound?
If you hear a ratcheting sound when the lift is all the way up, it indicates normal overload protection. This sound MUST be heard, as it confirms the platform is all the way up and the chair/platform is secure.
How to fix a Harmar Mobility AL560 Lifting Systems that doesn't reach the ground?
If the Harmar Mobility Lifting System lift does not reach the ground, check the attachment of the hitch adaptor to the hitch post on the back of the lift. It is possible that the incorrect hitch adapter was installed.
Why isn't the license plate light working on my Harmar Mobility AL560 Lifting Systems?
The license plate light runs from the four-prong trailer plug located on the vehicle harness that powers the lift. Check that the four-prong connector is wired correctly.
Why is there extra wire leading to the lift motor on my Harmar Mobility AL560?
The extra wire is provided in case a swing-away option is used with the Harmar Mobility Lifting Systems lift.
General| Foldable Platform | Yes |
|---|---|
| Weight Capacity | 350 lbs |
| Power Source | 12V battery |
| Type | Wheelchair Lift |
| Applicable Mobility Devices | Wheelchairs and Scooters |
| Warranty | 3 Years |
Guides on general operation, model-specific use, and manual override.
Steps for lowering, driving onto, securing, and raising the lift.
Operation details for Micro, AL570/XL, and Swing-Away models.
Instructions for operating the lift during power failure.
Essential safety precautions and maintenance guidelines.
Important warnings and advice for safe lift usage and handling.
Tools required, unpacking, and initial installation overview.
Steps for vehicle wiring, hitch, adapters, and mounting.
Detailed instructions for connecting the lift's wiring harness.
Hitch requirements, weight calculations, and hitch adapter selection.
Guides for installation with hitch post, swing-away, and AL030 adapter.
Procedures for attaching anchor plates or U-bolt kits to mobility devices.
Procedures for adjusting lift components for optimal performance.
Adjustments for various models like AL015, AL100, AL560, AL580, etc.
Installation and testing procedures for the chair docking system.
Common operational problems and their solutions.
Comprehensive diagrams of all lift components by model.
Wiring schematics and contents of the hardware pack.
