Alpine Stair Lifts Manual | | www.Harmar.com
,
Harmar, America’s Lift Leader™, is proud to extend our world-class line of stair lifts with the Alpine series.
Engineered for ease of use and years of trouble-free operation, Alpine is built in the USA and supported by a
staff with extensive industry experience in accessibility equipment.
This Owner's Manual should be read and understood in its entirety prior to attempting to operate the equipment.
All operating procedures must be followed in order to avoid possible injury and/or property damage.
CONTENTS:
Introduction and Dealer Information........................................... 3
Operation and Description of Features ....................................4-5
Important Operating Notes .......................................................... 6
Maintenance .................................................................................... 7
Troubleshooting .............................................................................. 7
Limited Warranty ............................................................................ 8
GENERAL SPECIFICATIONS
Application: Indoor, straight run stairways
Track Length: 32 feet (max)
Rated Load:
Seat: 300 pounds (136 kg)
Rated Speed: 19 feet per minute
Power Supply: 115 VAC, 60 Hz, 3-wire grounded outlet
Motor: 24 VDC
Drive System: Rack and pinion
Track: Extruded aluminum
Angle of Incline: 25° to 50°
IMPORTANT
THE SERIAL NUMBER of your stair lift is:
This serial number contains important information about your lift. This number may be needed if the lift requires replacement parts.
Please keep it accessible.
)-./0'12'31450456
To Next Page
Loading...
