Harmar Mobility SL400 - Information; Dealer Information; Owner Information; Technical Specifications

3
TEC 0018 2016APR11 P/N: 610-00013 Rev B
Vantage Stair Lift Owner's Manual 2016
Information
Dealer Information
Name: _____________________________________________________________________
Address: ___________________________________________________________________
__________________________________________________________________________
Telephone Number: __________________________________________________________
Email: _____________________________________________________________________
If you have questions concerning the operation or maintenance of your stair lift, please contact your dealer
Owner Information
Thank you for purchasing a Vantage Stair Lift from Harmar Mobility. It is our hope this lift will provide the
independence you want in your day-to-day life.
Date purchased: _____________________________________________________________
Lift serial number: ___________________________________________________________
If warranty work or service is needed, your dealer will need the data above to receive factory information or order parts
for this lift.
Technical Specications
Weight capacity: ......................................................................................300 lbs.
Stair angles: ..................................................................................25 - 45 degrees
Return trips/charge: ........................................................................................6
Speed: .............................................................................................19 ft/min.
Shipping weight: ............................................................................. Approx. 184 lb.
Interchangeable arms: ....................................................................................Yes
Interchangeable side to side: ..............................................................................Yes
Battery: ..............................................................................................24 VDC
Power supply input: ......................................................................120 VAC; 15A 60 Hz
Power supply output: .......................................................................33 VDC; 1.2 Amps
Drive system: ................................................................................ Rack and pinion
Rail: ..................................................................................... Extruded aluminum
Plastic covers: ..........................................................................ABS - ame retardant