installation guide
8
Basic functionality 4
4.3 Setting the clock
Press once and the hour will ash.
Use the
(Up/Down key) to select the hours.
Press again until minutes ashes.
Use the
(Up/Down key) to select the minutes.
Press button again until the week day ashes.
Use the
(Up/Down key) to select the day of the week.
After setting the day, do not press any buttons and the
thermostat will go back to normal operating mode.
4.4 Setting the maximum oor temperature
This function is used mainly for wooden oors and is only
available in program modes using the oor sensor (modes 3
and 5)
The temperature setting should be maximum 35°C, which is
also the default set point of the thermostat.
If you choose to control the oor temperature solely by the
oor sensor (mode 2), the max. oor temperature is set for
35°C and cannot be changed.
To Next Page
Loading...
Need help?
General