Assembly Guide
STEP 1
Leave the carton in the flat position. After opening this carton, carefully take your Adjustable
Base to the desired location and leave it topside down.
STEP 2
Take out four Support Legs (C) from the Accessories Box. Tighten the Four Legs onto the
Adjustable Base. Securely tighten the legs and leave no gap between the legs and the base.
STEP 3
Insert two AAA Batteries (M) into the compartment of the Remote Control (A)
IMPORTANT NOTE:
Two people are required to set up your
adjustable base.
To Next Page
Loading...
