Power outage or failure of remote control
In the case of failure of the Remote Control, press and hold the Emergency Button on the
RF receiver to flatten your Adjustable Base. When releasing the Emergency Button, all
the movements will stop immediately.
In the case of the power outage, insert two 9V Batteries (not included) to the Battery
Compartment and connect it to the Motor. Please refer to the following picture. It can be
used as the backup power to flatten your adjustable bed by pressing the emergency
button of the RF receiver or using remote. Please be noted that the back power is only
for flatting the Base without load.
To Next Page
Loading...
