Harmony DREAMTIME ELITE - Entanglement with Vehicle Seat Belt; Installing;Removing Shoulder Belt Guide

! WARNING: To avoid possible entanglement and
choking with your vehicle’s shoulder belts, Harmony
Juvenile Products recommends that the following
precauons are taken when installing your booster
seat:
1. Pull the shoulder poron of the vehicle seat belt all
the way out unl the retractor locks.
2. SLOWLY let the seat belt retract unl it is snug against
your child.
3. ENSURE that the seat belts do not press on the
child’s esh or push the child’s body into an unnatural
posion.
4. Do the same for all unused vehicle seat belts.
! Teach your child that seat belts are not toys and should
NEVER be played with, regardless of whether the car is
in moon or not.
! ALWAYS be aware of what your children are doing in
the back seat.
ENTANGLEMENT WITH VEHICLE SEAT BELT

SHOULDER BELT GUIDE
! OPENING OF RED BELT GUIDE CLIP MUST FACE FORWARD.

1. Insert loop end of strap
around bar on rear of seat
❶ on side nearest to the
vehicle retractor.
2. Pass the red clip and strap
through the loop end ❷ and pull strap
ght ❸.
It is recommended to store the unused
shoulder belt guide along with any other
parts from the booster seat for future use.
❶
❷
❸
22