EasyManua.ls Logo

Harmopool Hydrolyse EC20 - Incharge; Characteristics; Important Elements

Harmopool Hydrolyse EC20
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
Incharge
This manual contains all necessary information for installation, troubleshooting and
maintenance. Read the manual thoroughly before opening or using the unit. The
manufacturer of this product will not be held responsible for any injury and/or damage to
the product, if that is the result of improper installation or unnecessary/intended
maintenance. It is essential that you always follow the instructions in this manual.
Installation by qualified personnel is required.
Only a qualified installer, center, person, or authorized dealer can repair this
product.
Maintenance and servicing should be performed at the recommended time and
frequency, as indicated in this manual.
Use only original standard parts. Failure to do so will void your warranty.
Characteristics
Durable: the materials used are chlorine, acid (sulfuric) and base resistant. They
can withstand prolonged exposure to swimming pool water (even with salt for salt
electrolysis). The dosing devices are not suitable for use with hydrochloric acid (HCl)
Simple operation: the unit is very convenient to operate. Turn it on and set the
desired pH (acid) or redox value (Chlorine).
Low cost: the operational cost is very low because the pool water never turns green
when used correctly.
Important elements :
Incomplete grounding of the elements can have negative consequences on the
measurement results and lead to less good pool water.
Separate earthing with separate earthing pin for pump, electrolysis is
recommended.
Correct and proper grounding can avoid many problems.
Only use city water, preferably no rainwater or well water.