Installation
Installation items
The factory provides the plate with water treatment equipment without a plug for the
devices. Dit device is elektrisch connected to the salt electrolysis device.
Attention!
○ The electrical installation shall be carried out in such a way that:
- The salt electrolysis and acid pump cannot work if the filter pump does not work.
- The salt electrolysis and acid pump can be switched off if the filter pump is working.
- Switching off can always be done with the small on/off buttons on the devices
○ Adding the chemicals for the pool should be done downstream from the pool
accessories such as heating, UV lamp, filter etc.
To Next Page
Loading...