EasyManua.ls Logo

Harris FALCON III - Page 103

Default Icon
244 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
101
SATCOM Ping Test
R BAT VULOS --- VINSON CT
START PING TEST
TO SCROLL / ENT TO CONT
YES
R BAT VULOS --- VINSON CT
PING TEST
IN PROGRESS
PRESS CLR TO ABORT
R BAT VULOS --- VINSON CT
PING RX STRENGTH: 87%
ENT TO REPEAT / CLR TO CANCEL
R BAT VULOS --- ------------- CT
UNABLE TO PING
CHECK RADIO CONFIG
PRESS CLR / ENT TO EXIT
R BAT VULOS TON VINSON CT
PING TEST
UNAVAILABLE
PRESS CLR / ENT TO EXIT
•The SATCOM Ping Test reports the Receive Satellite Signal Strength between 0
and 100 percent. The test transmits a small burst signal to the satellite and
measures the received power returned from the satellite. The SATCOM Ping
Test can be used to aid in antenna pointing.
• Execute a SATCOM Ping Test and note the RX Strength.
Adjust the antenna azimuth and execute the test again. Repeat until the
strongest signal is obtained.
• Repeat the test adjusting the antenna elevation.
• UNABLE TO PING, CHECK RADIO CONFIG error will be displayed if no
COMSEC is assigned to the Preset.
• The Ping Test is unavailable in LOS.

Related product manuals