106
Scan Operations (3)
R BAT SCAN ---- ------------ CT
SCANNING. . . .
PRESS CLR TO STOP
R BAT SCAN TON VINSON CT
FMVOICE01
LOS VOC FM --- 01
TYPE TRF MOD CHAN KEY
R BAT VULOS TON VINSON CT
BEACON
CLONE MODE
SCAN
R BAT VULOS TON VINSON CT
SCAN
TO SCROLL / ENT TO CONT
ENABLE
3 GHI
MODE
Enter Scan Mode by pressing the MODE/3 button, scroll and select SCAN then
ENABLE scan. The display changes to SCANNING…. SCAN at the top of the
screen will be flashing indicating the radio is in automatic scan mode.
When the radio receives a signal or is transmitting, the screen will display the
channel and SCAN will be flashing indicating the radio is in automatic scan
mode.
Press the CLR button to enter manual scanning. SCAN at the top will stop
flashing while in manual scanning. Use the PRE +/- button to change to other
channels in the scan list. Press the CLR button again to re-enter automatic scan
mode.
To exit Scanning completely, press the MODE button, select SCAN and DISABLE
Scan.
To Next Page
Loading...
