182
25 kHz DAMA Programming (2)
. . TS – CFG – 07– DAMA–NET02-CHANNEL
CHANNEL NUMBER: 0 1
256.8500 297.8500
RX FREQ TX FREQ
2
. . YS PRESETS – CFG – 07 – DAMA – NET02
RANGING
ADDRESS
CHANNEL
. . CFG – 07– DAMA – NET02-CHANNEL-TX
TRANSMIT CAPABILITY
USE TO SCROLL
FULL (TX ENABLED)
. . FG – 07– DAMA – NET02-CHANNEL-KEY
CONSTANT KEY PORT
USE TO SCROLL
NO
. . FG – 07– DAMA – NET02-CHANNEL-KEY
SET CUSTOM CHANNELS
USE TO SCROLL
NO
. . YS PRESETS – CFG – 07– DAMA – NET02
CHANNEL
ADDRESS
RANGING
. . 07 – DAMA – NET02-RANGING-METHOD
RANGING METHOD
USE TO SCROLL
ACTIVE
. . 07– DAMA – NET02-RANGING-PFCFG
PLATFORM CONFIG
USE TO SCROLL
SLOW MOVING
•Select CHANNEL
• Valid entries for CHANNEL NUMBER are 001 to 247 (predefined), 248, and 249
(user defined). 999 is not valid for DAMA. The RX FREQ and TX FREQ will
change based on the Channel Number. Invalid Channels are displayed as
dashes.
• Select FULL (TX ENABLED) for TRANSMIT CAPABILITY. The other choice is
EMCON (RX ONLY)
• YES or NO for CONSTANT KEY PORT. Normal selection is NO.
• Select YES if you need to define custom channels 248, 249, and 999.
Otherwise select NO.
• Select ACTIVE for the RANGING METHOD (recommended). The second
choice is FIXED which requires an entry of 4569 through 5376 chips. One chip is
1/19200 second.
• For PLATFORM CONFIG select SLOW MOVING for a fixed terminal or FAST
MOVING for a moving terminal.
To Next Page
Loading...
