Harris FALCON III - Page 185

183

25 kHz DAMA Programming (3)
. . YS PRESETS – CFG – 07– DAMA – NET02
CHANNEL
RANGING
ADDRESS
. . G – 07– DAMA–NET02-ADDRESS-BASE
BASE ADDRESS
0100
ENTER 00001 TO 65535
0
. . TS – CFG – 07– DAMA–NET02-ADDRESS
GUARD LIST
BASE ADDRESS
. . TS – CFG – 07– DAMA–NET02-ADDRESS
BASE ADDRESS
GUARD LIST
. . FG – 07– DAMA–NET02-ADDRESS-GRD
ADD
. . 7– DAMA–NET02-ADDRESS-GRD-ADD
ADDRESS TO ADD
0001
ENTER 00001 TO 65535
0
. . TS – CFG – 07– DAMA–NET02-ADDRESS
GUARD LIST ADDED
USE ENT OR CLR TO EXIT
. . FG – 07– DAMA–NET02-ADDRESS-GRD
REVIEW
DELETE
ADD
• Select ADDRESS, then BASE ADDRESS
• Enter a BASE ADDRESS of 00001 to 49999. The valid range is 00001 to
65535. However, FORSCOM rules state all Base Addresses are 00001 to
49999.
• Select GUARD LIST.
• Enter the Network Address for your DAMA Network; 50000 to 65535. The
valid range is 00001 to 65535. However, FORSCOM rules state that only the
network address may be entered.
• Once an address has been added to the GUARD LIST, REVIEW and
DELETE are now available under. This is because up to 15 addresses can
be entered in the GUARD LIST.
• Press CLR twice