219
Installing Mission Plans
• The next step is to Install the Mission Plan file.
• Place the Cipher switch to LD
FILL MENU
FILL
TERMINAL MODE
INSTALL
INSTALL MENU
VIEW
UNINSTALL
INSTALL
INSTALL MENU - INSTALL
FILE TYPE
TO SCROLL / ENT TO CONT
MISSION PLAN
INSTALL MENU - INSTALL
SELECT PLAN FILE
TO SCROLL / ENT TO CONT
117G1UNNAMED
INSTALL MENU – INSTALL
INSTALL PLAN
TO SCROLL / ENT TO CONT
YES
INSTALL MENU – INSTALL
INSTALL COMPLETE
117G1UNNAMED
PRESS CLR / ENT TO CONTINUE
•After the Cipher switch is placed to the LD position, select INSTALL.
• In the Install Menu, select INSTALL
• The FILE TYPE is MISSION PLAN. Options and software are the other two
items that can be installed.
• Scroll to select the Mission Plan file for your radio or ALL PLAN FILES if more
than one Mission Plan file for your radio was transferred.
• Change INSTALL PLAN to YES.
• Once the install is complete the Cipher switch can be place back to either PT or
CT.
• NOTE: The Mission Plan Files must be installed before the radio is powered
OFF or the files will be deleted.
To Next Page
Loading...
