67
Problems Loading COMSEC
FILL MENU
BAD FILL
PRESS ANY KEY
FILL MENU
COMSEC FAULT
FILL MENU
ABORTED: MISMATCH
CLASSIFICATION
PRESS CLR / ENT TO CONTINUE
• If “BAD FILL PRESS ANY KEY” appears, check the radio settings and J1
connections before repeating process.
Check FILL Device type and FILL Device protocol.
Check Fill cable connections before repeating process.
Ensure O Ring in fill cable is secure.
Clean cable connections.
Attempt to reload radio.
• If “ABORTED: MISMATCH CLASSIFICATION” appears, you tried to load
Secret and Top Secret. You can only mix Secret, Confidential, and Unclassified.
• If “COMSEC FAULT” is flashing, turn both the fill device and radio OFF,
disconnect the fill device, turn the radio back on and try the procedure again.
To Next Page
Loading...
