68
Zeroizing and Clearing Data
R BAT VULOS TON VINSON CT
DEACTIVATE MISSION PLAN
SELECTIVE ZEROIZE
ZEROIZE ALL
R BAT VULOS TON VINSON CT
ZEROIZE ALL
TO SCROLL / ENT TO CONT
NO
R BAT VULOS TON VINSON CT
DEACTIVE PLAN
TO SCROLL / ENT TO CONT
NO
R BAT VULOS TON VINSON CT
MAINTENANCE PASSWORD
*****************
ENTER ALPHANUMERIC PASSWORD
R BAT VULOS TON VINSON CT
SELECT WAVEFORM
TO SCROLL / ENT TO CONT
SINCGARS
R BAT VULOS TON VINSON CT
ZEROIZE VINSON TEK
TO SCROLL / ENT TO CONT
TEK01
PANIC ZEROIZE
SUCCESSFUL
POWER CYCLE RADIO
R BAT VULOS TON VINSON CT
ZEROIZE GPS
ZEROIZE HAIPE
ZEROIZE WAVEFOEM
•A radio loaded with COMSEC takes on the classification of the COMSEC
• To interactively ZEROIZE radio Press 5/ ZERO key:
• ZEROIZE ALL will delete all COMSEC, TRANSEC, and reset the System
Presets and configurations to default.
• DEACTIVATE MISSION PLAN
will reset the System Presets and configurations
to default. Mission plans loaded from the PC Radio Programming Application will
not be deleted and can be reactivated.
• SELECTIVE ZEROIZE allows the operator to delete individual keys by selecting
the Waveform, Type, Crypto Mode, then the key to be deleted.
• ERASE MISSION PLANS
deletes mission plans loaded from the PC
Communications Planning Application
• To panic Zeroize the radio, rotate the Function Switch to Z. This performs the
same function as ZEROIZE ALL. The radio must be turned off after Panic
Zeroizing. The radio will display a CRYPTO ALERT PANIC ZEROIZE message
when turned back on.
To Next Page
Loading...
