Harris FALCON III - Page 92

90

Dedicated SATCOM
Programming (2)
PGM – SYS PRESETS – CFG – 06 - VULOS
GENERAL CONFIG
COMSEC
FREQUENCY
. . YS PRESETS – CFG – 06 – VULOS - FREQ
CHANNEL NUMBER : 99
USER USER
RX FREQ TX FREQ
9
. . YS PRESETS – CFG – 06 – VULOS - FREQ
RECEIVE ONLY
TO SCROLL / ENT TO CONT
NO
PGM – SYS PRESETS – CFG – 06 - VULOS
GENERAL CONFIG
FREQUENCY
COMSEC
. . PRESETS – CFG – 06 – VULOS - COMSEC
CRYPTO MODE
TO SCROLL / ENT TO CONT
VINSON
. . PRESETS – CFG – 06 – VULOS - COMSEC
CRYPTO KEY
TO SCROLL / ENT TO CONT
TEK01
. . YS PRESETS – CFG – 06 – VULOS - FREQ
CHANNEL NUMBER : 04
260.4250 294.0250
RX FREQ TX FREQ
8
• Select FREQUENCY
• Enter the Channel code. There are 247 channel codes that correspond to a
set of pre-defined transmit and receive frequencies. Codes 248, 249, and
999 allow for user defined frequencies. The screens for user defined
frequencies are the same as the LOS screens.
• Select NO for RECEIVE ONLY. YES will prevent the radio from transmitting.
• Select COMSEC
• For CRYPTO MODE select VINSON for 25 kHz wideband or ANDVT for 5
kHz narrowband.
• Select the CRYPTO KEY position (e.g. TEK01)