Harris FALCON III - Page 94

92

• Select 8.0 KHz for FM DEVIATION. 6.5 KHz and 5.0 KHz are the other choices.
6.5 KHz is for SINCGARS compatibility.
Dedicated SATCOM
Programming (4)
. . PRESETS – CFG – 06 – VULOS - TRAFFIC
TRAFFIC MODE
TO SCROLL / ENT TO CONT
VOICE AND DATA
. . PRESETS – CFG – 06 – VULOS - TRAFFIC
DATA MODE
PRESS ENT TO CONTINUE
SYNCHRONOUS
. . PRESETS – CFG – 06 – VULOS - TRAFFIC
VOICE MODE
TO SCROLL / ENT TO CONT
LPC 2400
. . PRESETS – CFG – 06 – VULOS - TRAFFIC
LPC CODEBOOK
TO SCROLL / ENT TO CONT
ENGLISH
. . PRESETS – CFG – 06 – VULOS - TRAFFIC
OPTION CODE: 010
5K SBPSK 2400 OFF
BW MOD TYPE RATE FEC
PGM – SYS PRESETS – CFG – 06 - VULOS
TRAFFIC
SQUELCH
TX POWER
. . S PRESETS – CFG – 06 – VULOS - POWER
TX POWER LEVEL
TO SCROLL / ENT TO CONT
HIGH
. . S PRESETS – CFG – 06 – VULOS - POWER
SQUELCH TYPE
DISABLED
PRESS ENT TO CONTINUE
• If ANDVT was selected for the CRYPTO MODE then the TRAFFIC MODE
choices are VOICE AND DATA or DATA. Select VOICE AND DATA.
• The DATA MODE is SYNCHRONOUS or ASYNCHRONOUS.
• For VOICE MODE select either LPC 2400 or MELP 2400. MELP provides
better voice quality.
• LPC CODEBOOK choices are ENGLISH, DUTCH, and ARABIC, Leave set to
ENGLISH.
• The OPTION CODE cannot be edited. For VOICE AND DATA the code is
010. For DATA the option code choices are 008 (1200 bps) and 010 (2400
bps).
• TX POWER settings are the same as LOS; HIGH, MEDIUM, LOW, and
USER.