HART HTMS01 - Operation; Cutting Warped Material

28 – English
CUTTING WARPED MATERIAL
See Figures 32 - 33.
Whencuttingwarpedmaterial,alwaysmakesureitisposi-
tionedonthemitertablewiththeconvexsideagainstthe
fenceasshowninfigure 32.
Ifthewarpedmaterialispositionedthewrongwayasshown
in figure 33,itwillpinchthebladenearthecompletionof
thecut.
WARNING:
To avoid a kickback and to avoid serious personal
injury,neverpositiontheconcaveedgeofbowedor
warpedmaterialagainstthefence.
RIGHT
WRONG
OPERATION
FIG. 32
FIG. 33