HART HTMS01 - Features; Product Specifications

9 – English
PRODUCT SPECIFICATIONS
BladeArbor.............................................................. 5/8in.
BladeDiameter......................................................7-1/4in.
NoLoadSpeed..................................... 5,100/min.(RPM)
Input.................................. 120V,AConly,60Hz,9Amps
CuttingCapacitywithMiterat0°/Bevel0°:
 Maximumlumbersizes.................. 1-1/2in.x4-1/4in.
CuttingCapacitywithMiterat45°/Bevel0°:
 Maximumlumbersizes.........................1-1/2in.x3in.
CuttingCapacitywithMiterat0°/Bevel45°:
 Maximumlumbersizes.........................1in.x4-1/4in.
  and1-1/2in.x3-1/2in.
CuttingCapacitywithMiterat45°/Bevel45°:
 Maximumlumbersizes:...............................1in.x3in.
LOWER
BLADE
GUARD
UPPER
BLADE
GUARD
“D” HANDLE
CONTROL ARM
MITER
LOCK KNOB
“NO HANDS ZONE”
LABEL
DUST BAG
WORK
CLAMP
MITER
FENCE
MITER
SCALE
“NO HANDS ZONE”
BOUNDARY LINE
THROAT
PLATE
FEATURES
FIG. 1