EasyManua.ls Logo

Hartmann Veroval Compact+ - Monitor Maintenance; Warranty Conditions; Contact Information for Customer Enquiries; Technical Data

Hartmann Veroval Compact+
53 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30 31
9. Monitor maintenance
Only use a soft, damp cloth to clean the monitor. Please do not use thinner, alcohol,
detergents or solvents.
The cu can be cleaned carefully using a slightly damp cloth and mild soap solution.
Do not completely immerse the cu in water.
It is recommended to clean and disinfect the cu regularly or after each use,
especially when used by several users, to prevent infection. The cu should
be disinfected, particularly on the inside, by wiping with a disinfectant. Use
a disinfectant that is compatible with the cu materials, e.g. 75% ethanol or
isopropyl alcohol. Other suitable specic disinfectants are listed on our website
(Chapter11).
Keep the monitor in the storage box to protect it from external inuences.
10. Warranty conditions
We oer a 3-year warranty on this high-quality blood pressure monitor from the
purchase date and in accordance with the conditions listed below.
Warranty claims must be made during the warranty period. The purchase date must
be documented by an appropriately completed and stamped warranty certicate or
proof of purchase.
Within the warranty period, HARTMANN will replace or repair free of charge any
faulty device components caused by material faults or manufacturing errors. This
does not extend the warranty period.
For local warranty conditions, please consult the local warranty certicate.
This device is solely intended for the purpose stated in these instructions for use.
The manufacturer is not liable for damage or injuries resulting from improper
handling, use or unauthorized interference. Accessory parts that are subject to
wear and tear (batteries, cus, etc.) are excluded from the warranty. Claims
for compensation are limited to the value of the product; compensation for
consequential damage or injuries is expressly excluded.
In warranty cases, please send the monitor with cu and, if applicable, the power
supply unit, together with the fully completed and stamped warranty certicate or
purchase receipt directly or via your dealer to the Customer Services department of
your country.
11. Contact information for customer enquiries
ZA HARTMANN South Africa Epsom Avenue, Northriding,
2169 Johannesburg
www.veroval.info
Tel. +27 860 4278 6266
phzahelpdesk@hartmann.info
If necessary, please contact us at the relevant address listed at the end of the
instructions for any questions regarding initial startup, use and maintenance of the
device, or to report an unexpected operating malfunction or incident.
For a patient/user/third party in the European Union and in countries with identical
regulatory regime (Regulation (EU) 2017/745 on Medical Devices); if, during the use of
this device or as a result of its use, a serious incident has occurred, please report it to
the manufacturer and/or its authorized representative and to your national authority.
12. Technical data
Model Veroval
®
BPW 26
Type BPM27B
Measuring method Oscillometric
Cu pressure range 0 - 300 mmHg
Measuring range Systolic (SYS): 50 - 280 mmHg
Diastolic (DIA): 30 - 200 mmHg
Pulse: 40 - 199 pulse beats per minute
Displaying of correct values outside the measuring
range cannot be guaranteed.
Display unit 1 mmHg
Technical measurement
accuracy
Cu pressure: ±3mmHg
Pulse: ±4% of the displayed pulse rate
English
English
ENEN
IFU_9252050_020323.indd 30-31IFU_9252050_020323.indd 30-31 02.03.23 10:4202.03.23 10:42

Related product manuals