Hartmann Veroval Compact+ User Manual

12 13
• Failure to comply with the above can impair the performance characteristics of the
device.
• Do not use the device near strong electromagnetic elds and keep it away from
radio equipment and mobile phones. Portable and mobile high-frequency and
communication devices, such as telephones and mobile phones, can impair the
functionality of this electronic medical device. Therefore keep a minimum distance
of 30 cm.
• Further documentation in accordance with the electromagnetic compatibility
standard can be requested from the manufacturer or found on our website
(www.veroval.info).
Instructions for the measurement function check
Every Veroval ® device has been carefully tested by HARTMANN for measurement
accuracy and has been developed with a view to a long service life. We recommend
carrying out a metrological check every 3 years for devices in professional use ,
for example, in pharmacies, medical practices or hospitals. Please also observe the
national regulations specied by the legislator. Metrological checks may only be
carried out by the competent authorities or authorised maintenance providers against
cost reimbursement.
Instructions for calibration mode
A functional check of the device can be carried out on a person or using a suitable
simulator. A metrological check involves testing for leaks in the pressure system and
potential deviations in the pressure reading. Remove at least one battery to switch to
calibration mode. Now hold the START/STOP button down and re-insert the battery.
Release the button after a few seconds and, after a few moments, ‘ ’ will appear
on the display. ‘ ’ and ‘ ’ will then appear. Press the START/STOP button
briey. ‘ ’ and ‘ ’ will appear on the display. Instructions on the metrological
check will be supplied by HARTMANN upon request to the competent authorities or
authorised maintenance providers.
Disposal information
• This product (monitor and cu) is subject to the European Directive 2012/19/EU
on Waste Electrical and Electronic Equipment and is marked accordingly. Never
dispose of electronic equipment in your household waste. Please obtain
information about your local regulations on the proper disposal of electrical
and electronic products. This protects the environment and human health.
• To protect our environment, empty batteries must not be disposed of in household
waste. Please comply with the relevant waste disposal regulations or use
public collection points, recycling points or electronic retailers.
3. Blood pressure information
Two values must be measured to determine blood pressure:
• Systolic (upper) blood pressure, which is produced when the heart contracts and pumps blood into the blood vessels.
• Diastolic (lower) blood pressure, which is produced when the heart is expanded and lls with blood again.
• Blood pressure values are displayed in mmHg.
For improved assessment of the results, a trac light system is located on the left side of the Veroval ® BPW 26 which is a direct result indicator, making it easier to categorise the
measured value. The World Health Organization (WHO) and the European Society of Cardiology (ESC) & European Society of Hypertension (ESH) have developed the following
summary for classifying blood pressure values:
Results indicator Evaluation Systolic pressure Diastolic pressure
Red Grade 3 hypertension above 179 mmHg and/or above 109 mmHg
0range Grade 2 hypertension 160–179 mmHg and/or 100–109 mmHg
Yellow Grade 1 hypertension 140–159 mmHg and/or 90–99 mmHg
Green High normal 130–139 mmHg and/or 85–89 mmHg
Green Normal 120–129 mmHg and/or 80–84 mmHg
Green Optimal up to 119 mmHg and up to 79 mmHg
Classication of blood pressure taken in practice and denition of hypertension grade (source: 2018 ESC/ESH guidelines)
English
English
ENEN
IFU_9252050_020323.indd 12-13IFU_9252050_020323.indd 12-13 02.03.23 10:4202.03.23 10:42

Hartmann Veroval Compact+ Specifications

General

Brand	Hartmann
Model	Veroval Compact+
Category	Blood Pressure Monitor
Language	English