To Next PageTo Next Page
Need help?Do you have a question about the Harvia Virta and is the answer not in the manual?
General| Control Type | Separate control unit |
|---|---|
| Material | Stainless Steel |
| Stones capacity | 50 kg |
| Frequency | 50 Hz |
| Heating Element | Stainless steel |
| Protection Class | IPX4 |
| Heater type | Electric |
| Voltage | 400 V |
| Supply voltage | 400 V |
| Weight | 15 kg |
| Fuse | 16 A |
Proper stone placement affects heater function and safety.
Initial heating may produce smells; ventilation is crucial for proper operation.
Basic etiquette and relaxation advice for sauna users.
Crucial safety advice to prevent injury or hazards during sauna use.
Guidance for diagnosing and resolving common heater operational issues.
Details on sauna construction, insulation, ventilation gaps, and materials.
Natural phenomenon of wooden surfaces darkening over time due to heat and light.
Requirements for air exchange rate and placement of vents for optimal sauna air quality.
How to select the correct heater output based on sauna volume and wall insulation.
Recommendations for maintaining cleanliness in the sauna room and on the heater.
Pre-installation checks for heater suitability, voltage, and safety distances.
Minimum required distances from flammable materials for safe heater placement.
Guidelines for installing a safety railing around the heater, maintaining safety distances.
Instructions for mounting the control unit and temperature sensor.
Procedures and regulations for connecting the heater to the electrical network.
Steps for physically installing and leveling the heater.
Guide on how to replace the heater's heating elements.
