To Next PageTo Next Page
Need help?Do you have a question about the Harvia PC90XE and is the answer not in the manual?
General| Power | 9 kW |
|---|---|
| Voltage | 400 V |
| Heater Type | Electric |
| Connecting cable | 5 x 2.5 mm² |
| Fuse | 3 x 16 A |
| Frequency | 50 Hz |
| Heating elements | Stainless steel |
| Max temperature | 110 °C |
| Protection class | IPX4 |
| Sauna Room Size (m3) | 9-14 m³ |
| Supply voltage, phase | 3-phase |
Proper stacking of sauna stones affects safety and heating capability.
First use may produce smells; ventilation is required for optimal heating.
How to turn the heater on/off and basic operation.
Explains how to navigate the settings menu and adjust values.
Details on using additional features like lighting.
How to maintain sauna stones for optimal performance and safety.
Steps to turn on the sauna heater and check initial display readings.
Procedure for turning off the heater and switching to standby mode.
How to control sauna room lighting via the control panel.
Explains the function of safety and door switches for heater operation.
Information on using remote switches for heater control.
How to activate and deactivate the control panel lock feature.
Information on remotely controlling the heater using switches.
Explains the automatic power saving mode activation.
Crucial safety information regarding high temperatures and heater proximity.
Explanation of symbols used in the manual.
Proper technique for adding water to stones for steam and humidity.
Guidelines for safe and enjoyable sauna bathing practices.
Guidance for diagnosing and resolving common heater issues.
Describes the construction requirements for a sauna room.
Normal phenomenon where wooden surfaces darken over time.
Specifies air exchange rates and vent placement for optimal sauna air quality.
How to determine the correct heater output based on sauna room volume and insulation.
Recommendations for maintaining cleanliness within the sauna room.
Pre-installation checks for heater compatibility, power, and location.
Specifies minimum clearances around the heater to prevent fire hazards.
Detailed guide on connecting the heater to the electrical network.
Information regarding insulation resistance testing during installation.
Instructions for correctly positioning the temperature sensor.
Guidance on mounting the control panel for safe and effective operation.
Step-by-step instructions for physically mounting the heater.
Procedure for resetting the heater's overheat protection mechanism.
