Units of Measure
Purpose: Several combinations of units of measure are available depending on what is most useful.
The following units of measure are available:
• CAN (°C, psi, GPM)
• UK (°C, bar, IGM)
• USA (°F, psi, GPM)
• SI (°C, bar, LPM)
To change the units of measure, follow procedure below.
1. Begin on the main display
2. Press on the controller
3. Press or to highlight Settings
4. Press to go into that menu section
5. Press or until you see Unit of Measure Zone
Figure 7: Units of measure screen
6. Press to move the blinking cursor around the screen
7. Press or to select different units of measure
8. Press several times to return to the main display
To Next Page
Loading...