Email: service@haskris.com
V. Controller Display
Main Display
Indicates the state of the chiller
The desired supply fluid temperature
Measured supply fluid temperature
Measured supply flow rate (if applicable)
Refrigerant pressure in low side of the refrigerant circuit
Refrigerant pressure in high side of the refrigerant circuit
Description of main display data
Status Modes
The ON/OFF switch is in the ON position
Indicates the chiller is beginning operation. Appears while the chiller is initially
working to control temperature.
The ON/OFF switch is in the ON position
Indicates the normal running of the chiller once sv is achieved
The physical ON/OFF switch is in the OFF position
An alarm or fault occurred and stopped the chiller
The Remote ON/OFF feature is enabled, and the remote signal is either not
present or is telling the chiller to be OFF
Description of status modes
To Next Page
Loading...