Step 4) Adjust Egg Racks
Conturn
TM
30 comes with 6 pre-installed racks. If your eggs are bigger than chicken eggs, racks
must be adjusted.
To adjust,
1. Remove the rack fixing bar (3) and pins (4)
2. Remove main turner bar (5) from motor
3. Adjust the egg racks (2) for your egg size
4. Attach main turning bar (5) to motor arm
and racks
5. Attach the rack fixing bar (3) and pins (4)
Adjust trays using above guide
Racks must be adjusted for larger eggs. If the egg is too large, it may fall down during turning.
To Next Page
Loading...
