Hatco Glo-Ray GRSDH Series User Manual (English)

Questions and Answers:

M
michaelrosarioSep 1, 2025
Why is my Hatco Glo-Ray GRSDH food cavity not hot enough?
- M
  michelleabbottSep 1, 2025
  If your Hatco Food Warmer cavity is not hot enough, first, check the Temperature Control and adjust it to a higher setting. If the issue persists, it could be due to the heating elements or the Temperature Control not functioning correctly. In that case, contact an authorized service agent or Hatco for assistance. Also, make sure that excessive air movement around the unit is restricted. Check if the unit is connected to the correct power supply.
M
Madison KingAug 30, 2025
Why does my Hatco Food Warmer have no heat but the light is on?
- K
  Kevin HardyAug 30, 2025
  If your Hatco Food Warmer has no heat but the light works, the Temperature Control might be set too low; try adjusting it to a higher setting. If that doesn't solve the problem, the heating element(s) may not be working, and you should contact an authorized service agent or Hatco for assistance.
G
Gina AlexanderAug 29, 2025
Why is the food cavity on my Hatco Food Warmer not hot enough?
- B
  Bethany CampbellAug 29, 2025
  If the food cavity of your Hatco Food Warmer isn't hot enough, there might be several reasons. First, check if the Temperature Control is set too low and adjust it to a higher setting. Also, excessive air movement around the unit could be the cause; try to restrict or redirect air movement away from the unit or install flip-up doors. If these steps don't resolve the issue, contact an authorized service agent or Hatco for assistance, as the heating element(s) may not be working or the unit may be connected to an incorrect power supply.
J
Joseph JamesAug 27, 2025
What to do if Hatco Glo-Ray GRSDH has no heat and no light?
- M
  Meghan CordovaAug 27, 2025
  If your Hatco Food Warmer has no heat and no light, first ensure that the power is turned ON. Check if the Power I/O switch is in the “I” (on) position. Also, check if the circuit breaker has tripped, and if so, reset it.
T
Tina BrooksAug 26, 2025
What to do if Hatco Food Warmer has no heat, but light works?
- K
  Keith GuerraAug 27, 2025
  If your Hatco Food Warmer has no heat but the light is working, the Temperature Control might be set too low. Try adjusting it to a higher setting.
J
Jennifer BoydAug 25, 2025
What to do if Hatco Glo-Ray GRSDH Food Warmer food cavity is not hot enough?
- A
  Adam EstradaAug 25, 2025
  If the food cavity of your Hatco Food Warmer isn't hot enough, several factors could be the cause. First, check if the Temperature Control is set too low and adjust it to a higher setting. Another potential reason is excessive air movement around the unit. Try to restrict or redirect air movement away from the unit or install flip-up doors to contain heat and block airflow.
S
Shannon RamirezAug 23, 2025
Hatco Glo-Ray GRSDH Food Warmer has light but no heat, what could be the issue?
- K
  Kim UnderwoodAug 23, 2025
  If your Hatco Food Warmer light is working, but there is no heat, the Temperature Control might be set too low; try adjusting it to a higher setting. If that doesn't work, the heating element(s) or the Temperature Control might not be working properly. In this case, contact an Authorized Service Agent or Hatco for assistance.