To Next PageTo Next PageWhat to do if my Hatco Glo-Ray GRPWS has no heat and no lights?
If your Hatco Food Warmer has no heat and no lights, first, ensure the Power On/Off switch is in the On position. If that doesn't solve the issue, reset the circuit breaker. If the circuit breaker continues to trip, you should contact an Authorized Service Agent or Hatco for assistance.
Why is the heated base or shelf not hot enough on my Hatco Glo-Ray GRPWS?
If the heated base or shelf of your Hatco Food Warmer isn't hot enough, start by adjusting the Temperature Controls to a higher setting. Also, restrict or redirect any excessive air movement (like from an air conditioning duct or exhaust fan) away from the unit.
How to adjust the temperature if the Hatco Glo-Ray GRPWS Food Warmer heated base or shelf is too hot?
If your Hatco Food Warmer's heated base or shelf is too hot, adjust the Temperature Controls to a lower setting.
How to fix a Hatco Glo-Ray GRPWS Food Warmer when the light bulb is not working?
If the light bulb in your Hatco Food Warmer isn't working, first replace the light bulb. If it still doesn't work, make sure the Power On/Off switch is in the On position.
General| Model | GRPWS Series |
|---|---|
| Category | Food Warmer |
| Brand | Hatco |
| Material | Stainless Steel |
| Well Capacity | Varies by model |
| Wattage | Varies by model |
| Voltage | 120V or 208V |
| Width | Varies by model |
| Heat Source | Infrared |
| Control Type | Thermostatic |
| Temperature Range | Up to 200°F |
| Electrical Options | Single or three phase |
| Certifications | UL, NSF |
| Type | Glo-Ray Food Warmer |
Precautions regarding electrical shock and safe plug usage.
Guidelines to prevent fire by maintaining safe distances.
Key warnings, cautions, and notices for safe product operation.
