To Next PageTo Next PageWhat to do if my Hatco Glo-Ray GRPWS-2424T has no heat and no lights?
If your Hatco Food Warmer has no heat and no lights, first, ensure the Power On/Off switch is in the On position. If that doesn't solve the issue, reset the circuit breaker. If the circuit breaker continues to trip, you should contact an Authorized Service Agent or Hatco for assistance.
Why is the heated base or shelf not hot enough on my Hatco Food Warmer?
If the heated base or shelf of your Hatco Food Warmer isn't hot enough, start by adjusting the Temperature Controls to a higher setting. Also, restrict or redirect any excessive air movement (like from an air conditioning duct or exhaust fan) away from the unit.
How to adjust the temperature if the Hatco Food Warmer heated base or shelf is too hot?
If your Hatco Food Warmer's heated base or shelf is too hot, adjust the Temperature Controls to a lower setting.
How to fix a Hatco Glo-Ray GRPWS-2424T when the light bulb is not working?
If the light bulb in your Hatco Food Warmer isn't working, first replace the light bulb. If it still doesn't work, make sure the Power On/Off switch is in the On position.
General| Model | GRPWS-2424T |
|---|---|
| Brand | Hatco |
| Product Line | Glo-Ray |
| Category | Food Warmer |
| Width | 24 inches |
| Depth | 24 inches |
| Voltage | 120V |
| Material | Stainless Steel |
| Heating Element | Infrared |
| Shelving Material | Stainless Steel |
| Exterior Material | Stainless Steel |
| Type | Countertop |
| Temperature Control | Thermostatic |
| Certification | NSF, UL |
Defines WARNING for serious injury/death and CAUTION for minor or moderate injury.
Precautions against electrical shock, including grounding, water, and cord care.
Safety guidelines for clearances from combustibles and proper bulb selection.
Advises caution with hot surfaces and safe operating temperatures.
Details electrical ratings and shipping weights for Triple Shelf models.
Provides voltage, watts, amps, plug type, and shipping weight for specific models.
Steps to plug in, turn on, and set temperature controls for each shelf.
Lists symptoms like light not working, food temp issues, with solutions.
