What to do if my Hatco Glo-Ray GRPWS-2424D has no heat and no lights?
If your Hatco Food Warmer has no heat and no lights, first, ensure the Power On/Off switch is in the On position. If that doesn't solve the issue, reset the circuit breaker. If the circuit breaker continues to trip, you should contact an Authorized Service Agent or Hatco for assistance.
Why is the heated base or shelf not hot enough on my Hatco Food Warmer?
If the heated base or shelf of your Hatco Food Warmer isn't hot enough, start by adjusting the Temperature Controls to a higher setting. Also, restrict or redirect any excessive air movement (like from an air conditioning duct or exhaust fan) away from the unit.
How to adjust the temperature if the Hatco Glo-Ray GRPWS-2424D Food Warmer heated base or shelf is too hot?
If your Hatco Food Warmer's heated base or shelf is too hot, adjust the Temperature Controls to a lower setting.
How to fix a Hatco Glo-Ray GRPWS-2424D Food Warmer when the light bulb is not working?
If the light bulb in your Hatco Food Warmer isn't working, first replace the light bulb. If it still doesn't work, make sure the Power On/Off switch is in the On position.
Details electrical safety precautions to prevent injury or death.
Outlines precautions to prevent fire risks from the equipment.
Emphasizes proper food handling and temperature for safety.
Warns about hot surfaces and the need for caution when touching.
Covers guidelines for proper unit location, support, and handling.
Covers unpacking, handling, leg installation, and glass panel placement.
Explains startup, setting temperature, and shutdown procedures.
General| Model | GRPWS-2424D |
|---|---|
| Brand | Hatco |
| Category | Food Warmer |
| Width | 24 inches |
| Depth | 24 inches |
| Heat Source | Electric |
| Wattage | 1200 watts |
| Voltage | 120 volts |
| Material | Stainless Steel |
| Control Type | Thermostatic Control |
| Type | Countertop |
To Next Page
