How to fix Hatco Food Warmer when unit is on, but no lights?
If your Hatco Food Warmer is on but the lights are not working, it could be due to a defective light bulb. Replace the light bulb. Another possible cause is a blown fuse; in that case, replace the blown fuse.
Hatco Glo-Ray GRSDH Food Warmer has light but no heat, what could be the issue?
If your Hatco Food Warmer light is working, but there is no heat, the Temperature Control might be set too low; try adjusting it to a higher setting. If that doesn't work, the heating element(s) or the Temperature Control might not be working properly. In this case, contact an Authorized Service Agent or Hatco for assistance.
What to do if Hatco Glo-Ray GRSDH Food Warmer food cavity is not hot enough?
If the food cavity of your Hatco Food Warmer isn't hot enough, several factors could be the cause. First, check if the Temperature Control is set too low and adjust it to a higher setting. Another potential reason is excessive air movement around the unit. Try to restrict or redirect air movement away from the unit or install flip-up doors to contain heat and block airflow.
What to do if Hatco Food Warmer has no heat, but light works?
If your Hatco Food Warmer has no heat but the light is working, the Temperature Control might be set too low. Try adjusting it to a higher setting.
What to do if Hatco Glo-Ray GRSDH has no heat and no light?
If your Hatco Food Warmer has no heat and no light, first ensure that the power is turned ON. Check if the Power I/O switch is in the “I” (on) position. Also, check if the circuit breaker has tripped, and if so, reset it.
How to fix a Hatco Glo-Ray GRSDH with no heat but the light works?
If your Hatco Food Warmer has no heat but the light is working, the temperature control might be set too low; try adjusting it to a higher setting. If the heating element or the temperature control is not working properly, contact an authorized service agent or Hatco for assistance.
What to do if Hatco Glo-Ray GRSDH light bulb is not working?
If the light bulb in your Hatco Food Warmer is not working, it could be defective and needs to be replaced. Another possible cause is that the power is turned OFF; in this case, move the Power ON/OFF switch(es) to the ON position.
Why is my Hatco Glo-Ray GRSDH food cavity too hot?
If the food cavity in your Hatco Food Warmer is too hot, it could be due to the temperature control being set too high; adjust it to a lower setting. If the temperature control is not working properly, or if the unit is connected to an incorrect power supply, contact an authorized service agent or Hatco for assistance.
What to do if Hatco Food Warmer food cavity is too hot?
If the food cavity in your Hatco Food Warmer is too hot, the Temperature Control might be set too high. Try adjusting it to a lower setting.
How to fix a Hatco Glo-Ray GRSDH Food Warmer food cavity that is too hot?
If the food cavity in your Hatco Food Warmer is too hot, the Temperature Control might be set too high. Try adjusting the Temperature Control to a lower setting. If the issue persists, the Temperature Control might not be working properly, or the unit might be connected to an incorrect power supply. In either of these cases, contact an Authorized Service Agent or Hatco for assistance.
General| Model | GRSDH Series |
|---|---|
| Type | Infrared Foodwarmer |
| Product Line | Glo-Ray |
| Control | Infinite heat control |
| Manufacturer | Hatco |
| Certifications | UL, NSF |
To Next Page
