EasyManua.ls Logo

Hatco HBGBHC Series - User Manual

Hatco HBGBHC Series
24 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Built-In Heated Glass Shelves
嵌入式保温玻璃板
HBGBHC Series/系列
Installation and Operating Manual
安装及操作手册
P/N 07.04.983.00 © 2020 Hatco Corporation
Do not operate this equipment unless you have read
and understood the contents of this manual! Failure
to follow the instructions contained in this manual
may result in serious injury or death. This manual
contains important safety information concerning
the maintenance, use, and operation of this product.
If you’re unable to understand the contents of this
manual, please bring it to the attention of your
supervisor. Keep this manual in a safe location for
future reference.
English = p 2
WARNING
请在 真阅读并理解本手册的内容后再操作本设
备！不按照本手册中的说明操作可能会导致严重
的人身伤亡事故。本手册中包含了有关本产品维
护、使用和操作的重要安全事项。如果您不理解
本手册的内容，请将本手册交给主管人员，以提
请其注意。请将本手册妥善放置，以便参照。
中文 = 第 12 页

Table of Contents

Questions and Answers

  • R
    Ryan Kelly DDSAug 11, 2025
    What to do if my Hatco HBGBHC Indoor Furnishing unit is not working at all?
    • J
      James SloanAug 11, 2025
      If your Hatco Indoor Furnishing unit is not working, first ensure it is plugged into a proper power supply and that the Power switch is in the I (on) position. If the issue persists, it could be due to a malfunctioning Power switch, a burned-out heating element, or a defective remote-mounted control. For these issues, contact an Authorized Service Agent or Hatco for assistance.
  • O
    ograyAug 21, 2025
    Why is my Hatco HBGBHC Indoor Furnishing unit too hot?
    • D
      Dr. Richard DeckerAug 21, 2025
      If your Hatco Indoor Furnishing unit is too hot, the setpoint temperature may be set too high, so adjust it to a lower setting. Also, ensure that the unit is plugged into the correct power supply that matches the unit's specifications; verify this with qualified personnel.
  • M
    Mary WilliamsAug 30, 2025
    How to fix a Hatco Indoor Furnishing unit that is not hot enough?
    • S
      Sheena LeeAug 30, 2025
      If your Hatco Indoor Furnishing unit is not hot enough, the setpoint temperature may be set too low; in this case, adjust it to a higher setting. Also, the unit's location might be exposed to air currents from air conditioning ducts or exhaust fans. Try to block these air currents or relocate the unit.

Hatco HBGBHC Series Specifications

General IconGeneral
ModelHBGBHC Series
CategoryIndoor Furnishing
CapacityVaries by model (number of shelves and pan capacity)
DimensionsVaries by model
WeightVaries by model
MaterialStainless Steel
CertificationUL, NSF

Related product manuals